Краткие сведения
Классифицирование: Глинозем CAS No.: 1344-28-1 Другие Имена: активированный оксид алюминия СЧ: Al2o3 nh2o (0<N¤0.8) EINECS No.: 215-691-6 Место происхождения: Кита (материк) Стандарт ранга: Промышленная ранг Очищенность: 93% Возникновение: белый шар Применение: адсорбента, носителя катализатора Фирменное наименование: ар Номер Модели: ар - активированного оксида алюминия стандарт:: рт.ст./не 3927-2007
Подробности Упаковки
Подробности Упаковки: влагой- доказательство бумажный мешок, полиэтиленовую пленку, химическое волокно оплетенные мешки, 25kg/bag
activated aluminum oxide/ activated alumina
Activated Alumina For Desiccant is a high effective dryer for dry deeply in micro-water.
In certain operating conditions and regeneration conditions, the dry depth can below the dew point temperature -70 degrees, the product can be used as defluorinate agent for high fluorided drinking water, as fluoride removal agent (fluoride removal capacity of large)for alkane cycling in the alkyl-benzene production ,as the depickling regeneration agent for transformer oil ,as the dryer for some industries such as oxygen industry, textile industry, gas drying in electronics industry ,air drying in automation instruments, as well as dryer and decontaminating agent for fertilizer, petrochemical and other industries (dew point can be up to -40 degrees), in air separation ,the dew-point adsorption of pressure change can up to -55 degrees. It is a high effective dryer for dry deeply in micro-water. It is an ideal dryer for non-thermal regeneration device.
KA401
KA402
KA403
KA404
KA405
Appearance
Whte, Sphere, No Odor, Insoluble In Water, Innocuous
Crystal Type
x-p
x-p
y
y
x-p
Chemical Composition
Al2O3 %
93
93
93
93
90
Na2O %
0.3
0.3
0.5
0.15-0.3
0.3
LOI
%
6-8
6-8
8
5
6-8
Bulk Density
g/ml
0.68-0.72
0.70-0.75
0.65-0.75
0.70-0.80
0.68-0.72
Surface Area
m2/g
280
280
200-260
200
300
Pore Volume
ml/g
0.30-0.45
0.30-0.42
0.40-0.46
0.40
0.30-0.50
Static Absorption (RH=60%)
%
Water Absorption
15-17
Fluorine Absorption
0.12
Water Absorption
50
Water Absorption
50-70
Water Absorption
17-19
Active
%
56-62
Attrition Loss
%
1.0
1.0
1.0
0.4
0.8
Crushing Strength (mm)
0.4-1.2
30
1-2
40
40
2-3
60
60
3-5
100
100
100
100
4-6
120
130
120
110
KA401: is for as adsorbent
KA402: is for defluorinating
KA403: is for absorption in producing hydrogen perixide (H2O2)
KA404: is for catalyst carrier
KA405: is for dehydrating and drying in air seperation etc.
Package:25kg/pp bag,or as per customers' requirements